“Quad-band flexible magnesium zinc ferrite (MgZnFe2O4)-based double negative metamaterial for microwave applications”

This article presents vertically coupled, rectangular complementary split-ring resonator-shaped quad-band double-negative (DNG) metamaterial unit cells, that is, having both negative permittivity and permeability, which redirect negative refractive and also are not found in nature. The metamaterial is fabricated on magnesium zinc ferrite-based flexible microwave substrates, and the flexible substrates are chosen with two different concentrations of magnesium (Mg) denoted by Mg₃₀ and Mg₅₀ for 30% and 50% of Mg, which possess dielectric constants of 4.32 and 3.15 and loss tangents of 0.003 and 0.005, respectively. The proposed metamaterials are demonstrated by utilizing the CST microwave simulator, and their effective parameters are extracted according to the Nicolson-Ross-Wire method. With Mg_30, the prepared, flexible metamaterial shows measured resonances at 3.70 GHz, 7 GHz, 8.60 GHz, and 9.78 GHz, whereas with Mg₅₀ it shows the measured resonances at 4.10 GHz, 7.70 GHz, 9.33 GHz, and 10.62 GHz. Very good effective medium ratios (EMR) along with DNG properties are obtained, namely 6.5 and 5.85 for Mg₃₀ and Mg_50, respectively, with a physical dimension of 12.5 × 9.5 mm² for both of the unit cells_. Also, the electric field, magnetic field, and surface current distribution at different resonances and the polarization insensitivity at different polarization angles were observed. Thus, the designed new flexible substrate microwave materials based on DNG metamaterials are potential candidates for S-, C- and X-band applications, as well as for flexible microwave technologies.     

Solvent Influence on Absorption Spectra and Tautomeric Equilibria of Symmetric Azomethine-Functionalized Derivatives: Structural Elucidation and Computational Studies

A new series of azomethine-functionalized compounds was synthesized from the condensation of 2-hydroxy-1,3-propanediamine and 2-thienylcarboxaldehydes in the presence of a drying agent. The derivatives were spectroscopically characterized by NMR, LC-MS, UV/Vis, IR and elemental analysis. Variable temperature ¹H-NMR (−60 to +60 °C) was performed to investigate the effect of solvent polarity; the capability of solvent to form H-bond was found to dramatically influencing the tautomerization process of the desired structures. The calculated thermochemical parameters (ΔH₂₉₈, ΔG₂₉₈ and ΔS₂₉₈) at DFT and MP2 levels of theory explained that 3 b exists in equilibrium with two tautomers. The basis of the electronic absorptions was pursued through Time-Dependent Density-Functional Theory (TD-DFT). Analysis of the structural surfaces was inspected and the molecular electrostatic potential (MEP) demonstrated that the three functionalized compounds were relatively analogous in the electronic distributions. Furthermore, the electrophilic and nucleophilic centers lying on the molecular surfaces were probably playing a key-role in stabilizing the compounds through the nonclassical C−H⋅⋅⋅π interactions and hydrogen bonding. The impact of solvent polarity on absorption spectra were investigated via solvatochromic shifts. For instance, compound 3 c displayed a gradual shift of the maximum absorption to the red area when the solvent polarity was increased, recording a 21 nm of bathochromic shift. In contrast, no significant solvent-effect on 3 a and 3 b was observed. The solvation relation was pursued between Gutmann's donicity numbers the experimental λ_max; exhibited almost positive linear performance with a minor oscillation, that ascribe to the possible weak interface between the molecules of solute and designated solvents. The bandgap energy of all products were assessed experimentally using optical absorption spectra following Tauc approach, giving −4.050 ( 3 a ), −3.900 ( 3 b ) and −3.210 ( 3 c ) eV. However, the ΔE were computationally figured out from TD-DFT simulation to be −4.258 ( 3 a ), −4.022 ( 3 b ) and −3.390 ( 3 c ) eV.     

Influence of Carbon Nanotubes on Phase Composition,Thermal and Post-Heating Behavior of Cementitious Composites

This paper experimentally investigates the influence of carbon nanotubes (CNTs) on phase composition, microstructure deterioration, thermal behavior, and residual mechanical strengths of cementitious composites exposed to elevated temperatures. Cement mortars with small dosages of CNTs, 0.05% and 0.2% by weight of cement, were prepared and then heated at 25 °C, 150 °C, 200 °C, 450 °C, and 600 °C for two hours before being tested. The results show positive impact of the CNTs on the hydration process of cement mortar at room temperature and at higher temperatures up to 200 °C. Decomposition of the hydration products is obvious at 450 °C, whereas sever deterioration in the microstructure occurs at 600 °C. The nano reinforcement and bridging effect of the CNTs are obvious up to 450 °C. Thermal behavior characterization shows that CNTs incorporation enhances the thermal conductivity of the unheated and heat-treated mortar specimens. The decomposition of the hydration products needs more heat in the presence of CNTs. Finally, presence of CNTs significantly enhances the residual compressive and flexural strengths of heated mortar specimens for all studied temperatures.     

Challenges for impedimetric affinity sensors targeting protein detection

The review provides articles discussing big challenges behind successful design of impedimetric biosensors and the way such challenges were/could be addressed for highly sensitive affinity detection of proteins. In particular, the effect of gold etching by chloride ions or by CN^? ions (released from the redox probe [Fe(CN)₆]^3-/4-), the effect of ionic strength of the assay buffer; the effect of initial interfacial properties (capacitance) and the effect of the high analyte:bioreceptor ratio on electrochemical impedance spectroscopy–based biosensing are discussed. The review provides also short discussion related to other factors, which can significantly affect operational performance of electrochemical impedance spectroscopy–based biosensing including novel conductive interfaces, small bioreceptors, strategies for improved selectivity (nonbiofouling interfaces) and sensitivity (use of nanoparticles).     

Generalized Unsteady MHD Natural Convective Flow of Jeffery Model with ramped wall velocity and Newtonian heating; A Caputo-Fabrizio Approach

This theoretical investigation aims to highlight the unsteady freely convective fractional motion of a Jeffery fluid near an infinite vertical plate. The additional effects of ramped velocity condition, Newtonian heating, magnetohydrodynamics (MHD), and nonlinear radiative heat flux are also examined. A system of fractional order partial differential equations is established by choosing Caputo-Fabrizio fractional derivative as a foundation. Laplace transformation followed by an adequate choice of unit-less parameters is executed to solve the subsequent ordinary differential equations. Stehfest’s and Zakian’s numerical algorithms are invoked to find and justify the inverse Laplace transform of velocity and shear stress. Temperature and velocity gradients are evaluated at the wall to effectively probe the rate of heat transfer and shear stress. In this regard, numerical computations of Nusselt number and shear stress for several inputs of connected parameters are tabulated. Furthermore, graphical elucidations of velocity and temperature profiles are provided to observe the rise and fall subjected to variation in several parameters. Additionally, the velocity profile for both ramped boundary condition and constant boundary condition is analyzed to get a deep insight into the physical phenomenon of the considered problem. Finally, a comparative analysis between Jeffery fluid and second grade fluid is carried out for both factional and ordinary cases, and it is determined that Jeffery fluids exhibit rapid motion in both cases.